Automating Battery Palletizing & Styrofoam Layering at Hankook & Company with Yaskawa Robots 🔋🤖

Industry > AutomotiveSector > ManufacturingSector > Logistics

#Yaskawa#GP250#BatteryPalletizing#FoamPlacementAutomation#ThroughputIncrease#LaborReduction#QualityConsistency

Process Overview

Hankook & Company’s palletizing solution prioritizes higher output and reduced labor requirements. After removing the existing line that was built around a single palletizer, the operation was split into two lines and reconfigured with two palletizers to secure production capacity (CAPA). In addition, manual placement of styrofoam and slip sheets was automated to reduce operator intervention—enabling one operator to manage both lines.

Project Background and Objectives

Background

The previous workflow had an imbalance between line production capacity (CAPA) and palletizing capacity (CAPA), requiring operators to manually support styrofoam and slip-sheet placement to maintain output. This structure forced continuous loading of slip sheets (approx. 7 kg each), causing significant operator fatigue. Also, the line had to wait until manual slip-sheet loading was completed, leading to large fluctuations in the logistics cycle time.

Key issues

Palletizing quality instability and speed loss caused by manual operations
Reduced productivity, increased operator fatigue, and skilled-labor dependency issues

Objectives

Improve production efficiency by minimizing repetitive manual tasks through upgraded robot automation
Ensure quality consistency by reducing manual intervention
Improve the work environment by reducing operator fatigue and strengthening safety

Components

Robot	YASKAWA industrial robot GP250
Peripherals	Battery infeed conveyor Sorter Battery bundle alignment conveyor Dedicated gripper Pallet conveyor Pallet supply unit Diverter conveyor Slip-sheet alignment station Styrofoam supply magazine

Workflow

STEP 1.	On the HMI, select the battery model and enter the required quantity.
STEP 2.	Batteries fed from the infeed line are aligned on the conveyor to the required count and queued for palletizing.
STEP 3.	The load is transferred and fixed in position at the palletizing station.
STEP 4.	Based on the recipe total layer count, slip sheets are aligned accordingly.
STEP 5.	The 6-axis robot grips the battery bundle.
STEP 6.	The robot automatically loads the bundle onto the pallet.

※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.

Features

Higher Productivity

Line production capacity (CAPA) improved by 30% through parallel operation.
Buffering for pallets, styrofoam, and slip sheets enables continuous production capability.

Quality Consistency

Standardized palletizing for defined battery and pattern specifications ensures consistent pallet quality.
Anti-drop prevention design helps reduce defects.

Improved Work Environment

Automation within the operator’s work zone reduces fatigue and injury risk.
Helps prevent musculoskeletal disorders caused by repetitive tasks.

Reduced Operating Cost

Instead of one operator running one palletizer, one operator can run two palletizers, reducing operating cost relative to output increase.

Prompt Project Completion

Using prior references and simulation, the line removal, installation, and stabilization were completed within 5 days of line downtime.

Results

Client Feedback	The customer stated, “After Marosol set up the palletizing line, material flow became smoother than before, and operator satisfaction increased due to a significant reduction in manual work. Despite the short installation schedule and initial concerns about a new vendor, the team completed line removal, installation, and ramp-up within just five days without a single drop incident. We validated more than 40 SKUs, stabilized quickly without impacting production output, and even our management team praised the results. In addition, Marosol’s engineers responded immediately to on-site variables through direct support, making deployment very smooth and resulting in high field satisfaction.

Client Feedback

The customer stated, “After Marosol set up the palletizing line, material flow became smoother than before, and operator satisfaction increased due to a significant reduction in manual work. Despite the short installation schedule and initial concerns about a new vendor, the team completed line removal, installation, and ramp-up within just five days without a single drop incident. We validated more than 40 SKUs, stabilized quickly without impacting production output, and even our management team praised the results. In addition, Marosol’s engineers responded immediately to on-site variables through direct support, making deployment very smooth and resulting in high field satisfaction.

Automating Battery Palletizing & Styrofoam Layering at Hankook & Company with Yaskawa Robots 🔋🤖

Solution Provider: Please log in to view

Application Field: Industry > Automotive, Sector > Manufacturing, Sector > Logistics

Related Use Cases

Piece Picking using Yaskawa and Mech-Mind

AI Palletizing using Hyundai YS140 and Mech-Mind

Yaskawa Industrial Robots + Automatic Styrofoam Placement?! Korea & Company Battery Palletizing Automation Case Study 🔋🤖

#Battery Palletizing# Palletizing Automation# Industrial# GP250# Marosol# Styrofoam Automatic Loading# Robot Loading System# Smart Factory# Korea & Company