Curious about the robots deployed?
Process Overview
This welding automation solution uses the Rainbow Robotics RB-5 and a NOUBELON DIGITAL MIG/MAG welder to weld cylindrical workpieces onto a plate, featuring fast teaching and high space efficiency. In manual welding, quality can vary significantly depending on operator skill, and the harsh working environment makes it difficult to secure experienced welders.
With this cell, even non-expert operators can simply load and unload parts, while the robot performs the critical welding process—enabling consistent weld quality and stable production output.
Components
| Robot | Rainbow Robotics RB5-850 Horizontal reach: 850 mm Repeatability: ±0.1 mm IP rating: IP66 |
|---|---|
| Peripherals | Tooling Welding torch Torch mount Peripheral Equipment NOUBELON welder (DPS series) — Digital MIG/MAG, Synergic operation supported Wire feeder Gas supply unit Robot mounting base Workpiece fixing jig Job start/command switch box |
Workflow
| STEP 1. | Secure the workpiece in the welding jig |
|---|---|
| STEP 2. | Press the job start button |
| STEP 3. | The robot performs the welding operation |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Recommended Use Cases
Laser Welding of Round Bars using Yaskawa Robots
This welding automation solution utilizes the YASKAWA GP8 robot to perform high-precision laser welding on round bar products from multiple angles. Previously, an operator had to manually lift each workpiece, load it into the welding machine, and repeat the process for the opposite side once the first side was finished. This manual sequence has been fully automated using the robot. Continuous production is now possible regardless of operator availability. By leveraging the fast and precise YASKAWA GP8, the system achieves both guaranteed quality and enhanced productivity.
Plastic Injection Molded Part Transport using Twinny NarGo 100
This logistics automation solution utilizes the Twinny NarGo 100 AMR to automate the transport of large plastic injection molded products to subsequent process stages. Equipped with triple safety sensors and advanced autonomous driving technology, Twinny's NarGo 100 performs tasks safely even in factories with complex layouts and high worker traffic. Previously, transporting heavy workpieces weighing around 100kg to a distant finished goods warehouse was time-consuming, causing idle time in processing and reducing productivity due to worker fatigue. Since implementing the autonomous robot, continuous processing has become possible, and worker fatigue has been significantly reduced, leading to an overall boost in productivity.
Cognex AI Vision: 4-Model Review 👀 Can This 3D AI Vision Read 255 Barcodes at Once?
Introducing four AI Vision solutions showcased by Cognex at the 2026 AW (Aircraft Automation Show). From simultaneous reading of 255 barcodes and 15-minute installation to deep learning cargo classification , check them out now if you are interested in Vision automation for logistics and manufacturing sites.
Process Overview
This welding automation solution uses the Rainbow Robotics RB-5 and a NOUBELON DIGITAL MIG/MAG welder to weld cylindrical workpieces onto a plate, featuring fast teaching and high space efficiency. In manual welding, quality can vary significantly depending on operator skill, and the harsh working environment makes it difficult to secure experienced welders.
With this cell, even non-expert operators can simply load and unload parts, while the robot performs the critical welding process—enabling consistent weld quality and stable production output.
Components
| Robot | Rainbow Robotics RB5-850 Horizontal reach: 850 mm Repeatability: ±0.1 mm IP rating: IP66 |
|---|---|
| Peripherals | Tooling Welding torch Torch mount Peripheral Equipment NOUBELON welder (DPS series) — Digital MIG/MAG, Synergic operation supported Wire feeder Gas supply unit Robot mounting base Workpiece fixing jig Job start/command switch box |
Workflow
| STEP 1. | Secure the workpiece in the welding jig |
|---|---|
| STEP 2. | Press the job start button |
| STEP 3. | The robot performs the welding operation |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Curious about the robots deployed?
Related Use Cases
Laser Welding of Round Bars using Yaskawa Robots
Plastic Injection Molded Part Transport using Twinny NarGo 100