This machine tending automation solution utilizes a Fanuc M-710iC/70 robot mounted on a linear track to automate the machining of heavy support rings across six WIA Turning Centers (LV450).
By employing a high-payload industrial robot and a linear track, the system can rapidly perform continuous operations for relatively large and heavy support rings without idle time. The previous manual process, where workers pushed carts to each machine, has been replaced by a centralized input system, significantly improving both logistics flow and space efficiency.
Components
| Robot |
|
|---|
Workflow
| STEP 1. | Feeding & Inspection: Picks the workpiece from the input conveyor and verifies its status. |
|---|---|
| STEP 2. | Machining: Picks the workpiece and loads it into the designated Turning Center for machining. |
| STEP 3. | Reorientation: Unloads the finished part onto a flipping jig to change the gripping direction. |
| STEP 4. | Cleaning: Transfers the part to the cleaning station and loads it. |
| STEP 5. | Measurement: Loads the part into the dimensional measurement device to verify the machining quality. |
| STEP 6. | Discharge: Places the finished part onto the discharge pallet. |
| STEP 7. | Palletizing: Once a layer is complete on the discharge pallet, the robot inserts an interlayer sheet and continues palletizing. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Recommended Use Cases
Machining Center Tending through Doosan M1509
This automation solution utilizes the Doosan M1509 collaborative robot to support metal machining operations in a Machining Center (MCT). The project was designed to improve production efficiency, reduce defect rates, and enhance operational workflow by automating simple, repetitive tasks. In the previous process, workers had to stand by the equipment constantly to manually load each workpiece. By delegating the loading and unloading tasks to the robot, operators can now manage and run multiple machines simultaneously. Furthermore, by implementing Gun Solution's technology, the robot can perform tasks in the same manner as a human operator even on older legacy machine tools, effectively reducing costs associated with separate hardware interfaces.
Hydraulic Fitting Machining Assistance for WIA Turning Center (KIT450) using Hyundai HH7
This machine tending automation solution utilizes two Hyundai HH7 robots mounted on an overhead linear track to automate the machining of hydraulic fittings for WIA KIT450 machine tools. To maximize space efficiency, the robots are installed on a linear track above the machine tools. This overhead configuration allows for a highly efficient, continuous automated process. Because the front of the machine remains unobstructed, operators can easily access the equipment for tool changes and routine maintenance. Additionally, this solution prevents musculoskeletal disorders in workers by automating the loading and unloading of heavy workpieces.
Fish Cake Sorting & Stacking with NACHI MZ07L & Vision Tracking
This automation solution utilizes twelve NACHI MZ07L robots and advanced vision tracking technology to stack fish cake products into plastic boxes. Even with irregular-shaped products like fish cakes, the system accurately recognizes the position of items moving on the conveyor and performs high-speed picking and placing into individual containers.
This machine tending automation solution utilizes a Fanuc M-710iC/70 robot mounted on a linear track to automate the machining of heavy support rings across six WIA Turning Centers (LV450).
By employing a high-payload industrial robot and a linear track, the system can rapidly perform continuous operations for relatively large and heavy support rings without idle time. The previous manual process, where workers pushed carts to each machine, has been replaced by a centralized input system, significantly improving both logistics flow and space efficiency.
Components
| Robot |
|
|---|
Workflow
| STEP 1. | Feeding & Inspection: Picks the workpiece from the input conveyor and verifies its status. |
|---|---|
| STEP 2. | Machining: Picks the workpiece and loads it into the designated Turning Center for machining. |
| STEP 3. | Reorientation: Unloads the finished part onto a flipping jig to change the gripping direction. |
| STEP 4. | Cleaning: Transfers the part to the cleaning station and loads it. |
| STEP 5. | Measurement: Loads the part into the dimensional measurement device to verify the machining quality. |
| STEP 6. | Discharge: Places the finished part onto the discharge pallet. |
| STEP 7. | Palletizing: Once a layer is complete on the discharge pallet, the robot inserts an interlayer sheet and continues palletizing. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.