This powder coating automation solution utilizes the Doosan M1013 collaborative robot to automate the powder coating of thin plate covers on a conveyor line.
Due to the nature of powder coating, high levels of dust are generated, and the repetitive motions cause significant strain on the wrists, making it a task often avoided by workers.
By implementing three robots to perform tasks previously handled by six manual workers, the working environment has been improved, and consistent quality has been secured.
Components
| Robot |
|
|---|
Workflow
| STEP 1. | Loading: Workpieces are fed into the system. |
|---|---|
| STEP 2. | Data Transfer: Workpiece shape information is sent from the PLC to the robot. |
| STEP 3. | Signal Confirmation: The robot confirms the entry signal of the workpiece. |
| STEP 4. | Powder Coating: Powder coating is performed according to the outer shape of the workpiece. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Recommended Use Cases
Solenoid Valve Coil Winding Automation with NACHI MZ07L
This industrial robot solution utilizes the NACHI MZ07L to automate the coil winding process for solenoid valves. By using a single robot to manage two winding machines simultaneously, the system minimizes idle time and maximizes production throughput through continuous operation.
Steel Plate Bending through Hyundai Robotics HS220
This automation solution utilizes the Hyundai Robotics HS220 to automate the high-risk task of bending heavy steel plates into complex shapes. Due to the weight and large dimensions of these products, manual operation is physically demanding and significantly hinders production efficiency. This project was initiated to boost productivity through heavy-load automation and to ensure workplace safety by removing workers from hazardous zones. Because the robot maintains its grip on the steel plate during the entire bending process, cycle times are shortened, ensuring high output and consistent quality.
Medical Fabric Cutting Automation using Vention’s Design Platform
This automated cutting solution is designed to handle medical surgical fabrics of varying lengths up to 3 meters. With professional support from Vention's engineering team, the system successfully automates the process of extending the fabric to precise lengths using pneumatic grippers and feeding rollers, followed by accurate cutting using a timing belt actuator.
This powder coating automation solution utilizes the Doosan M1013 collaborative robot to automate the powder coating of thin plate covers on a conveyor line.
Due to the nature of powder coating, high levels of dust are generated, and the repetitive motions cause significant strain on the wrists, making it a task often avoided by workers.
By implementing three robots to perform tasks previously handled by six manual workers, the working environment has been improved, and consistent quality has been secured.
Components
| Robot |
|
|---|
Workflow
| STEP 1. | Loading: Workpieces are fed into the system. |
|---|---|
| STEP 2. | Data Transfer: Workpiece shape information is sent from the PLC to the robot. |
| STEP 3. | Signal Confirmation: The robot confirms the entry signal of the workpiece. |
| STEP 4. | Powder Coating: Powder coating is performed according to the outer shape of the workpiece. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.