Features
Convenience
- Remote control via SOLlink
- Schedule cleaning at your preferred time
- Intuitive performance monitoring using work reports
- Safety features including front and rear cameras and sensors
Excellent cleaning performance
- Close-range cleaning up to 5-7cm from walls
- Productivity of up to 1,500 square meters per hour
- High cleaning versatility with wet cleaning
- Prevents contaminant absorption through continuous wet cleaning
Simplified work processes
- Simple operation using smart obstacle avoidance and pathing
- Easy manual operation, convenient size, and height
- Wireless charging station for automatic charging after cleaning
Superior safety is ensured through front and rear cameras and various sensors, along with safe driving capabilities such as LiDAR sensors, front and rear cameras, and tilt cameras.
A convenient customer experience is provided through SOLlink and dedicated control. A convenient customer experience is enhanced through continuous robot status checks and work reports after cleaning.
Cleaning performance close to walls, smart obstacle avoidance, and path-based cleaning provide superior cleaning results. A user-friendly UI and editing interface allow for easy access to cleaning settings and information checks, and changes.
Results
| Key Benefits | High customer satisfaction due to the cleaning of cutting oil and other oils generated during operation, as well as excellent obstacle avoidance and cleaning performance. Increased convenience thanks to the wireless charging station, which eliminates the need for manual charging. Wet cleaning of large areas with a single water supply is possible. The five-stage filtration system recycles wastewater, enabling wet cleaning of the largest area with a single water supply. Prevents cleaning delays due to water shortages and reduces work efficiency. An infrared camera sensor detects cleaning operation issues during nighttime cleaning when no one is present (no issues). For businesses with limited water cleaning time, the nighttime scheduling function resolves cleaning operation time issues. Businesses that operate until dawn can plan cleaning schedules to match the shutdown time. |
|---|---|
| Client Feedback | The cleaning performance is so effective that even a single pass is enough to notice the results. Most aluminum processing sites have similar environments to the installation site, so using SC50 and detergent is expected to yield positive results. The convenience of being able to remotely check the robot's status and clean it is also a plus. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Recommended Use Cases
Cleanliness Management using Gausium SC50 - Osstem Implant Production Plant
This is a case where Big Wave Robotics (Marosol) introduced the Scrubber50 cleaning robot to the Osstem Implant production plant for Cleaning Robot operations. Gausium Scrubber50 features a work process that is easy to use even for first-time robot users, excellent productivity, and various modes—including scrubbing, sweeping, and mopping—allowing for appropriate use depending on the situation. It is recommended for work environments requiring cleanliness management against dust and particles.
Shopping Center Cleanliness Management Using Gausium Phantas - Pangyo Familles Mall Edition
This is an example of Bigwave Robotics (Marosol) introducing the Phantas cleaning robot for maintenance operations at Pangyo Pameus Mall. The Gausium Phantas features an operation process that is easy for even first-time users to manage, along with excellent cleaning performance. It is capable of both dry and wet cleaning and offers various modes for appropriate use depending on the situation. It cleans by autonomously moving along a designated path with simple operation, requiring no separate intervention from the customer.
Gausium SC50: The Industrial Cleaning Robot That Perfectly Removes Oil Stains from Logistics Center Floors
This is a case where SC50 was installed at Big Wave Robotics (Marosol) for logistics warehouse cleaning management. By utilizing the SC50, automated in-house cleaning management was implemented, and an unmanned automatic system was operated by equipping the robot with a SIM chip that offers superior performance and convenience.
Features
Convenience
- Remote control via SOLlink
- Schedule cleaning at your preferred time
- Intuitive performance monitoring using work reports
- Safety features including front and rear cameras and sensors
Excellent cleaning performance
- Close-range cleaning up to 5-7cm from walls
- Productivity of up to 1,500 square meters per hour
- High cleaning versatility with wet cleaning
- Prevents contaminant absorption through continuous wet cleaning
Simplified work processes
- Simple operation using smart obstacle avoidance and pathing
- Easy manual operation, convenient size, and height
- Wireless charging station for automatic charging after cleaning
Superior safety is ensured through front and rear cameras and various sensors, along with safe driving capabilities such as LiDAR sensors, front and rear cameras, and tilt cameras.
A convenient customer experience is provided through SOLlink and dedicated control. A convenient customer experience is enhanced through continuous robot status checks and work reports after cleaning.
Cleaning performance close to walls, smart obstacle avoidance, and path-based cleaning provide superior cleaning results. A user-friendly UI and editing interface allow for easy access to cleaning settings and information checks, and changes.
Results
| ROI Period | 1 year (1 year worker annual salary 40 million won VS SC50 39 million won) |
|---|---|
| Key Benefits | High customer satisfaction due to the cleaning of cutting oil and other oils generated during operation, as well as excellent obstacle avoidance and cleaning performance. Increased convenience thanks to the wireless charging station, which eliminates the need for manual charging. Wet cleaning of large areas with a single water supply is possible. The five-stage filtration system recycles wastewater, enabling wet cleaning of the largest area with a single water supply. Prevents cleaning delays due to water shortages and reduces work efficiency. An infrared camera sensor detects cleaning operation issues during nighttime cleaning when no one is present (no issues). For businesses with limited water cleaning time, the nighttime scheduling function resolves cleaning operation time issues. Businesses that operate until dawn can plan cleaning schedules to match the shutdown time. |
| Client Feedback | The cleaning performance is so effective that even a single pass is enough to notice the results. Most aluminum processing sites have similar environments to the installation site, so using SC50 and detergent is expected to yield positive results. The convenience of being able to remotely check the robot's status and clean it is also a plus. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Related Use Cases
Cleanliness Management using Gausium SC50 - Osstem Implant Production Plant
Shopping Center Cleanliness Management Using Gausium Phantas - Pangyo Familles Mall Edition